ABS with excellent mechanical properties, excellent impact strength can be used at very low temperatures; ABS excellent wear resistance, good dimensional stability, but also has oil resistance, can be used for medium load and speed of the bearing. The creep resistance of ABS is larger than that of PSF and PC, but smaller than that of PA and POM. The bending strength and compressive strength of ABS are poor in plastic. The mechanical properties of ABS are greatly influenced by temperature.
    ABS is not affected by water, inorganic salt, alkali and influence of various acids, but soluble in ketones, aldehydes and chlorinated hydrocarbon, glacial acetic acid, vegetable oil, etc. erosion will produce stress cracking. The poor weather resistance of ABS is easy to be degraded under the action of ultraviolet light, and the impact strength is decreased by half after six months.
    ABS sheet has excellent impact strength, good dimensional stability, dyeing, molding and machining, high mechanical strength, high stiffness, low water absorption resistance, corrosion, simple connection, non-toxic and tasteless, has excellent chemical and thermal stability and electrical insulating properties. Heat resistance is not deformed, also has high impact toughness at low temperature. Is a kind of hard, not easy to scratch, not easy to deformation of the material. Low water absorption; high dimensional stability. Conventional ABS board is not very white, but the toughness is very good, you can cut the plate with a plate, can also open the die punch.
The heat distortion temperature of ABS is 93~118, and the products can be improved by about 10 degrees Celsius after annealing treatment. ABS can still show some toughness at -40, which can be used in the temperature range of -40~100.
    The transparency of transparent ABS plate is very good, grinding polishing effect is excellent and is instead of PC sheet material of choice. Compared with acrylic, its toughness is very good, can satisfy the product carefully processing. Disadvantage is transparent ABS relative price is more expensive.